Assault Rifle Multi-Tool (ARMT)

"The Assault Rifle Multi-tool or (ARMT) was designed for the military mainly for field stripping and quick repairs to the AR-15. It was quickly found that the ARMT fits many other useful roles and rifles. This tool also doubles for a close combat self-defense weapon if needed.

The ARMT is made from High Quality 4140-PH Steel, then heat treated and coated with Mil-Spec Nitro-Tec. Total Certified core hardness is 58 HRC. Total case hardness will equal about 61-63 HRC. ARMT is 7 1/4" long and almost 2 1/4" tall. The ARMT is flat black in color. To get a deeper color rub with house hold or gun oil.

Made in the USA.

The ARMT features:

• 3 Allen keys, 7/64, 9/64, 1/8 (The Allen Keys also double for a Pin Punch)
• 1 built in 10mm screwdriver
• 2 place 1/4 hex bit carrier
  
• 1 #2 Phillips hex bit, made from S2 tool steel
• 1 SQ2 hex bit, made from S2 tool steel
• 1 built in hex bit holder
• 5 High quality Buna-n o-rings to hold bits in place
• The ARMT is Ambidextrous and fits most hands!

Some of the things the ARMT can do:

• 3 common Allen keys to add, remove, or snug accessories
• Allen keys double for a pin punch
• 10mm screwdriver for the buttstock screws, scraping, and prying
• Remove or Tighten Notched Flash Hiders
• Push out Takedown pins
• Remove Firing Pin
• Remove bolt cam
• Remove bolt assembly from carrier
• Tighten or loosen bolt carrier key
• Carbon scraper
• Phillips P2 hex bit driver
• SQ2 hex bit driver
• Last resort self defense tool
• At 7 1/4" long and 2 1/4" tall, still small enough to fit in your pocket to carry everyday for all sorts of other projects."

Brand new from maker.